How to update Firmware via OTA server (internet)
The following procedure describes how to upgrade the display firmware from the CTOUCH internet server. The update can be performed via wired or wireless connection.
In the home screen press the CTOUCH button (under the logo).
The floating bar will appear in the bottom part of the screen. Press the [Settings] button.
The [About] section is the next step. Press on the About to go on the sub menu.
In the about section, check the current version installed. After you wrote down the version number press the [System update] button.
Select the second option [System net update], for the internet update. The first option is used only if you have the latest version for firmware available on the USB flash drive.
The display will check for a new version of firmware. In this case the new version is version 1032. To start the update press [Download].
Wait until the process is completed and device shows again the Home screen. Go in the About section and check if the new version is installed.
Note: In some rare cases, MirrorOP application will give the message that is not registered, go to About section, write down the license key and register again the device using that license key.