Below describes the way to create new MirrorOp USB token(s) to connect to the Leddura 2Share. Tokens contain executable MirrorOp files which do not install software on the PC. In case you are looking for the latest MirrorOp installer, please check this article: MirrorOp Software for Leddura 2Share
Advantage to create new USB tokens:
* MirrorOp will be updated to the latest version (make sure to run the latest firmware)
* Information from your local configuration will be added to the executable which makes connecting easier as the IP address will be automatically selected.
Connect a laptop via a LAN cable to the LAN OUT of the Leddura 2Share.
(Make sure DHCP is enabled for the LAN port used to connect your laptop)
Open the browser on the laptop and go to the IP address as mentioned on the Leddura 2Share screen (default IP is in the range 192.168.123.x).
Below page will come up where you need to select [Guest]
On the [Guest] page download the required MirrorOp Senders (Windows and Mac)
Copy both downloaded files to the root of the USB (remove all other files first).
Note: Below files names can be different depending on the configured IP address of your device
Close the USB within Windows before removing the USB.
The new created USB token is ready.